Workshop
Cutting, finishing, upholstery and assembly all happen in our own 14,000 m² facility in Masko, Istanbul. We do not outsource production.
Workshop
We do not subcontract
Every step, from cutting to assembly, happens under our own roof. That is why we control both the schedule and the quality.
- years of production
- 31years of production
- m² facility
- 14.000m² facility
- countries shipped to
- 26countries shipped to
- -point inspection
- 24-point inspection
Production process
- 01
We meet at the showroom
You see the fabric and finish samples in person, and we talk through the budget.
- 02
Measuring and technical drawings
Your room is measured, and the set becomes a production file built around those measurements.
- 03
Production
Cutting, finishing and upholstery in our own workshop. Nothing is subcontracted.
- 04
Delivery and assembly
Our own team installs it. There is no assembly charge.
Quality policy
24-point checklist
Every piece goes through the same list before it ships. If one item fails, the piece is not packed.
- Door alignment and gap tolerance
- Hinge and runner operating noise
- Surface gloss and blemish check
- Edge banding adhesion test
- Screw and dowel torque check
- Foam density and cover tension
- Dimension and diagonal verification
- Packing corner protection check
- Panel thickness and moisture measurement
- Grain direction and pattern match
- Drill centre deviation
- Primer thickness and drying time
- Colour code compared against the reference plate
- Lacquer hardness and scratch test
- Gilding and touch-up edge cleanliness
- Fabric batch number and shade match
- Stitch density and thread tension
- Button tufting alignment
- Frame staple and glue check
- Drawer full extension and soft-close
- Mirror fixing and safety film
- Lighting and electrical connection test
- Corner protector and foam placement
- Label, assembly guide and piece count
Workshop gallery
From our production floor
Frequently asked
- Is all of the production done in-house?
- Yes. Cutting, finishing, upholstery and assembly all happen at our 14,000 m² facility in Masko; we neither take nor place subcontract work.
- What happens if an item fails the checklist?
- The piece is not packed. It goes back to the relevant stage and the list is run again from the start.